xyz marketing inc.
2400 east main street
suite 103
st. charles, il 60174
630-584-3001
fax: 888-210-4593
email: dave@xyzmarketinginc.com




Home

LEADING EDGE TECHNOLOGY to GREENING EDGE TECHNOLOGY

RJ-45's Web Site


SENTINEL
Connector Systems Inc.

More about SENTINEL CONNECTOR

SENTINEL CONNECTOR IS GOING GREEN

X-TALK, EMI or LATENCY
GOT YOU DOWN?

THE ALIEN-EATER
BREAKTHROUGH TECHNOLOGY

http://xyzmarketinginc.com/sentinel/FilteredGigabitJacks.html
FILTERED RJ-45 GIGABIT JACKS

RJ-45s for MILITARY AND AEROSPACE APPLICATIONS including MIL-DTL-24643

MIL-C-38999/RJ-45 Hybrid Connector for MILITARY Applications

RJ-45s for POWER OVER ETHERNET (POE) PLUS Applications

RJ-45s for TIA-1005 Industrial Ethernet, EtherNet/IP and Factory Automation Applications

RJ-45s for SIEMENS PROFINET Industrial Cables

RJ-45s - UNSHIELDED PLUGS for 10GBase-T and Category 6 Applications

RJ-45s - SHIELDED PLUGS for 10GBase-T and Category 6 Applications



More about EMI SOLUTIONS

http://xyzmarketinginc.com/EMI/moreaboutemi.html

MIL-C-38999/RJ-45 Hybrid Connector for MILITARY Applications

EMI SOLUTIONS COMPLIANCE TESTING

EMI FILTERED INSERTS

EMI FILTERED CONNECTORS




More about GENERAL WIRE PRODUCTS

Coax & Twinax Cables

75 Ohm Broadband/Broadcast & Video Cables

50 & 93 Ohm Cables

Twinaxial Cables

Lucent DS3 DS4 Equivalents
Series 720, 728, 734 and 735


RGB Sync and Hold Cables


Factory Automation
and Process Control Cables

Industrial Motor Control Cables

Miniaturized Industrial Motor Control Cables

Hi Flex Cables

VFD/SERVO Hi Flex Cables





More about DATA DELAY DEVICES




Chase Security - Featured Products

Access Control & CCTV Towers

Security Pedestals

Sprinkler Head Guards



           

RJ-45 Shielded Plugs (STP) for High Performance Networks
10GBASE-T - Augmented Category 6 (6a) - Category 6 - Category 5e
Channel and Patch Cord Applications


One of the biggest challenges facing network equipment manufacturers today in their desire to increase network speeds and transmission frequencies......is solving complex Alien Crosstalk, Latency and EMI/RFI/EMP issues.

Through the innovation of Sentinel Connector Systems PATENTED RJ-45 plugs, end-users are experiencing lower insertion losses, fewer bit errors, greater channel throughput, more system margin, less network downtime and improved cable assembly yields.


PROPER PLUG SELECTION IS
CRITICAL FOR THE DESIRED ELECTRICAL PERFORMANCE
Got a cable? Sentinel would be happy to analyze and recommend the "RIGHT" RJ45 plug to use.

PRODUCTS SHOWN BELOW INCORPORATE A PATENTED CONDUCTIVE NEXT REDUCTION SYSTEM

(unless otherwise noted.....unshielded plug shown for reference)

WIRE MANAGEMENT BAR FACILITATES PRECISE CONDUCTOR CONTROL & ALIGNMENT


111S08080062L34 and 111S08080063L34      (Got Questions? email: dave@xyzmarketinginc.com)
(Click on Part Number to view Data Sheet)
Termination Tool - 900005     Termination Instructions for 62L34 and 63L34     Snagless Boot Option Matrix


111S08080062L34 111S08080063L34 Through the innovation of Sentinel's PATENTED RJ-45 plugs, end-users are experiencing lower insertion losses, fewer bit errors, greater channel throughput, more system margin, less network downtime and improved cable assembly yields.
RJ-45 plug part numbers 111S08080062L34 ("End A") and 111S08080063L34 ("End B") are to be used in conjunction with each other (one goes on one end of the patch cable and the other one goes on the other end).

The 111S08080062L34 features a 6 over 2 contact design that has 6 LONG and 2 SHORT contacts, while the 111S08080063L34 has a 2 over 6 contact design that has 2 LONG and 6 SHORT contacts. This contact design provides increased isolation and spatial dispersion within the plug to minimize Crosstalk.

Both plugs utilize a PATENTED Conductive NEXT Reduction System (made of the same material used in the AEROSPACE INDUSTRY) that suppresses reflections and reduces noise. The wire management system is also designed to fit the lay of the cable to provide faster cable assembly and again, to help with Crosstalk issues.

Both plugs accept a conductor OD Range of .037" to .042"

MAX Cable OD of .240" to .260"


Plug can be used with EITHER SOLID OR STRANDED CONDUCTORS.

111S08080062L34

111S08080063L34


111S08080062C34 and 111S08080063C34      (Got Questions? email: dave@xyzmarketinginc.com)
(Click on Part Number to view Data Sheet)
Termination Tool - 900007     Termination Instructions for 62C34 and 63C34


111S08080062C34 111S08080063C34 Same Features as above, but with the addition of a "C CRIMP" to the Shield for cable stress relief and added strength.
Ideal for use with oversize cable with larger OD's.
Both plugs accept a conductor OD Range of .037" to .042"
MAX Cable OD of .240" to .260"
Plug can be used with EITHER SOLID OR STRANDED CONDUCTORS




111S08080062C34


111S08080063C34


111S08080090L34      (Got Questions? email: dave@xyzmarketinginc.com)
(Click on Part Number to view Data Sheet)
Termination Tool - 900005     Termination Instructions for 90L34     Snagless Boot Option Matrix


111S08080090L34 Inside View of 111S08080090L34 The 111S08080090L34 features a 4 over 4 contact design that has 4 LONG and 4 SHORT contacts. This contact design provides increased isolation and spatial dispersion within the plug to minimize Crosstalk.
Plug utilizes a PATENTED Conductive NEXT Reduction System
For conductors with an OD Range of .044" to .048"
MAX Cable OD of .240" to .260"
Plug can be used with EITHER SOLID OR STRANDED CONDUCTORS

111S08080090L34



111S08080090C34      (Got Questions? email: dave@xyzmarketinginc.com)
(Click on Part Number to view Data Sheet)
Termination Tool - 900007     Termination Instructions for 90C34


111S08080090C34 Same Features as above, but with the addition of a "C CRIMP" to the Shield for cable stress relief and added strength.
Ideal for use with oversize cable with larger OD's.
For conductors with an OD Range of .044" to .048"
MAX Cable OD of .240" to .260"
Plug can be used with EITHER SOLID OR STRANDED CONDUCTORS




111S08080090C34



111S08080090H34      (Got Questions? email: dave@xyzmarketinginc.com)
(Click on Part Number to view Data Sheet)
Termination Tool - 900007      Termination Instructions for 90H34


111S08080090H34 Same Features as above, but designed to accept a Cable OD of up to .310".
Ideal for use with oversize cable with larger OD's.
For conductors with an OD Range of .044" to .048"
MAX Cable OD of .310"
Plug can be used with EITHER SOLID OR STRANDED CONDUCTORS





111S08080090H34



111S08080091L34      (Got Questions? email: dave@xyzmarketinginc.com)
(Click on Part Number to view Data Sheet)
Termination Tool - 900005     Termination Instructions for 91L34     Snagless Boot Option Matrix


111S08080091L34 Side View of 111S08080091L34 The 111S08080091L34 features a 4 over 4 contact design that has 4 LONG and 4 SHORT contacts. This contact design provides increased isolation and spatial dispersion within the plug to minimize Crosstalk.
Plug utilizes a Conductive NEXT Reduction System
For conductors with an OD Range of .048" to .052"
MAX Cable OD of .240" to .260"
Plug can be used with EITHER SOLID OR STRANDED CONDUCTORS


111S08080091L34



111S08080091C34      (Got Questions? email: dave@xyzmarketinginc.com)
(Click on Part Number to view Data Sheet)
Termination Tool - 900007      Termination Instructions for 91C34


111S08080091C34 Same Features as above, but with the addition of a "C CRIMP" to the Shield for cable stress relief and added strength.
Ideal for use with oversize cable with larger OD's.
For conductors with an OD Range of .048" to .052"
MAX Cable OD of .240" to .260"
Plug can be used with EITHER SOLID OR STRANDED CONDUCTORS




111S08080091C34



111S08080091H34      (Got Questions? email: dave@xyzmarketinginc.com)
(Click on Part Number to view Data Sheet)
Termination Tool - 900007     Termination Instructions for 91H34


111S08080091H34 Same Features as above, but designed to accept a Cable OD of up to .310".
Ideal for use with oversize cable with larger OD's.
For conductors with an OD Range of .048" to .052"
MAX Cable OD of .310"
Plug can be used with EITHER SOLID OR STRANDED CONDUCTORS





111S08080091H34



111S08080028L34      (Got Questions? email: dave@xyzmarketinginc.com)
(Click on Part Number to view Data Sheet)
Termination Tool - 900005     Termination Instructions for 28L34     Snagless Boot Option Matrix


111S08080028L34 Inside View of 111-08080028L34 The 111S08080028L34 features a 4 over 4 contact design that has 4 LONG and 4 SHORT contacts. This contact design provides increased isolation and spatial dispersion within the plug to minimize Crosstalk.
Plug utilizes a Conductive NEXT Reduction System
For conductors with an OD Range of .037" to .042"
MAX Cable OD of .240"
Plug can be used with EITHER SOLID OR STRANDED CONDUCTORS

111S08080028L34



111S08080028C34      (Got Questions? email: dave@xyzmarketinginc.com)
(Click on Part Number to view Data Sheet)
Termination Tool - 900007      Termination Instructions for 28C34


111S08080028C34 Same Features as above, but with the addition of a "C CRIMP" to the Shield for cable stress relief and added strength.
Ideal for use with oversize cable with larger OD's.
For conductors with an OD Range of .037" to .042"
MAX Cable OD of .240" to .260"
Plug can be used with EITHER SOLID OR STRANDED CONDUCTORS





111S08080028C34





RJ-45's Web Site Hotlink
FILTERED RJ-45 GIGABIT JACKS
RJ-45s for MILITARY AND AEROSPACE APPLICATIONS including MIL-DTL-24643
MIL-C-38999/RJ-45 Hybrid Connector for MILITARY Applications
RJ-45s for POWER OVER ETHERNET (POE) PLUS Applications
RJ-45s for TIA-1005 Industrial Ethernet, EtherNet/IP and Factory Automation Applications
RJ-45s for SIEMENS PROFINET Industrial Cables
UNSHIELDED RJ-45 PLUGS for 10GBase-T and Category 6 Applications
SHIELDED RJ-45 PLUGS for 10GBase-T and Category 6 Applications


Contact: Dave Jeskey
President
xyz marketing inc.
2400 east main street - suite 103 - st. charles, il 60174
phone: 630-584-3001.......fax: 888-210-4593
dave@xyzmarketinginc.com