xyz marketing inc.
2400 east main street
suite 103
st. charles, il 60174
630-584-3001
fax: 888-210-4593
email: dave@xyzmarketinginc.com




Home

LEADING EDGE TECHNOLOGY to GREENING EDGE TECHNOLOGY

RJ-45's Web Site


SENTINEL
Connector Systems Inc.

More about SENTINEL CONNECTOR

SENTINEL CONNECTOR IS GOING GREEN

X-TALK, EMI or LATENCY
GOT YOU DOWN?

THE ALIEN-EATER
BREAKTHROUGH TECHNOLOGY

http://xyzmarketinginc.com/sentinel/FilteredGigabitJacks.html
FILTERED RJ-45 GIGABIT JACKS

RJ-45s for MILITARY AND AEROSPACE APPLICATIONS including MIL-DTL-24643

MIL-C-38999/RJ-45 Hybrid Connector for MILITARY Applications

RJ-45s for POWER OVER ETHERNET (POE) PLUS Applications

RJ-45s for TIA-1005 Industrial Ethernet, EtherNet/IP and Factory Automation Applications

RJ-45s for SIEMENS PROFINET Industrial Cables

RJ-45s - UNSHIELDED PLUGS for 10GBase-T and Category 6 Applications

RJ-45s - SHIELDED PLUGS for 10GBase-T and Category 6 Applications



More about EMI SOLUTIONS

http://xyzmarketinginc.com/EMI/moreaboutemi.html

MIL-C-38999/RJ-45 Hybrid Connector for MILITARY Applications

EMI SOLUTIONS COMPLIANCE TESTING

EMI FILTERED INSERTS

EMI FILTERED CONNECTORS




More about GENERAL WIRE PRODUCTS

Coax & Twinax Cables

75 Ohm Broadband/Broadcast & Video Cables

50 & 93 Ohm Cables

Twinaxial Cables

Lucent DS3 DS4 Equivalents
Series 720, 728, 734 and 735


RGB Sync and Hold Cables


Factory Automation
and Process Control Cables

Industrial Motor Control Cables

Miniaturized Industrial Motor Control Cables

Hi Flex Cables

VFD/SERVO Hi Flex Cables





More about DATA DELAY DEVICES




Chase Security - Featured Products

Access Control & CCTV Towers

Security Pedestals

Sprinkler Head Guards




CHASE SECURITY SYSTEMS INC.
Certified MBE
Custom Metal Fabrication - Wire Forms, Expanded Metal, Perforated Metal, Sheet Metal

Featured Products

The items shown below represent just a few examples of the extensive product line of Chase's Wire Guards and Expanded Metal and Perforated Metal enclosures. For more detailed informationemail: dave@xyzmarketinginc.com

CHASE UL Approved Smoke Detector Guard
Model CSGC884N
(For Price and Delivery Information email: dave@xyzmarketinginc.com)
(Click on Model Number to view Data Sheet)

Inside of 884 Picture
Outside of 884 Picture CHASE SECURITY PATENTED SMOKE DETECTOR GUARD COMPENSATOR enhances the performance of the smoke detector by concentrating smoke and/or other products of combustion within the smoke detector guard. The compensator uses X-shaped baffles to direct smoke upward into the guard, amplifying the detector?s ability to find traces of smoke coming from any direction. This ensures a faster signaling response from the detector in the early stages of a fire. The compensator enclosure is designed for ceiling-mount use only and finished to aesthetically compliment it's surroundings.

NOTE: THIS PRODUCT IS DESIGNED TO BE USED WITH THE FOLLOWING SMOKE DETECTOR MODELS.....ADT 1951, Gamewell SS-I, Johnson Controls JC1951, Notifier 851, Silent Knight IDP-ION and Siemens ILI-1.

For over thirty years, our strong and inexpensive enclosures have been a welcome solution to the problem of smoke detector damage due to vandalism or false alarms.

Chase smoke detection concentrators are designed to provide ease of installation and peace of mind. Chase products can be used in universities, schools, parks, gyms, correctional facilities and many other locations.
Dimensions: ID 7.5" X 7.5" X 4" Deep


CHASE Fluorescent Light Guard
Model CSLG 2665
(For Price and Delivery Informationemail: dave@xyzmarketinginc.com)
(Click on Model Number to view Data Sheet)

CSLG2665 Picture CSLG2665 Application Photo
Chase Fluorescent Light Wire Guards are constructed of 7 Gauge Steel Welded at all points for strength and are supplied with mounting clips for ease of installation. The CSLG 2665 is uniquely designed to protect fluorescent light fixtures on walls or ceilings in areas such as gymnasiums, subway stations, stairwells, schools, institutions and other areas where abuse may be prevalent. The unit is finished with a nickel-lacquer coating which allows the guard to be used in outdoor applications, as well as indoor.
Dimensions: ID 26" X 6" X 5" Deep





CHASE Exit/Outdoor Light Guard
Model CSGW 1286
(For Price and Delivery Information email: dave@xyzmarketinginc.com)
(Click on Model Number to view Data Sheet)

CSGW1286 Picture CSGW1286 Application Photo Chase Exit/Outdoor Light Guards are constructed of 7 Gauge Steel reinforced welded construction with four wire-formed mounting eyelets for ease of installation. The CSGW 1286 is designed to protect wall-mounted lights such as exit, hallway and exterior lights. The CSGW 1286 is an ideal solution for models such as RAB Tallpack lights and RUUD Downlight Cutoff lights. Applications include schools, hotels, gymnasiums, institutional facilities, and other areas without obstructing the light given off by the enclosed device. Unit has a protective white epoxy finish which allows the guard to be used in outdoor applications, as well as indoor.
Dimensions: ID 12" X 8" X 6" Deep




CHASE Pull Station/Switch Guard
Model PSGH 652
(For Price and Delivery Information email: dave@xyzmarketinginc.com)
(Click on Model Number to view Data Sheet)

PSGH 652 Picture PSGH 652 Application Photo Picture Chase PSGH 652 Pull Station/Switch Wire Guard protects Pull Stations, Switches and Similar Products From Accidental Damage. Constructed of Heavy Duty All Welded 9 Gauge steel wire with four wire-formed mounting eyelets for ease of installation. It comes with a Protective Red Epoxy Coating. The PSGH 652 is recommended for use in areas where abuse might occur. Installs easily with screws and anchors (not provided).
Dimensions: ID 6.5" X 5" X 2 1/8" Deep






CHASE Thermostat Guard
Model CTWG 653
(For Price and Delivery Information email: dave@xyzmarketinginc.com)
(Click on Model Number to view Data Sheet)

Thermostat Application Photo Thermostat Application Photo Chase Thermostat Wire Guards protect Thermostats from Accidental Damage and Vandalism and provide maximum strength, air flow and visibility. The CTWG 653 has two welded mounting plates for a solid installation and is constructed of high quality 7 Gauge steel wire that is welded at all points for strength. It comes with a shiny Nickel plated finish with a Protective Lacquer Coating. They are recommended for use in areas where abuse might occur. Easy to install with screws and anchors (not provided).
Dimension: ID 6" X 5" X 3"






CHASE Horn/Strobe/Motion Detector Guard
Model CSGW 977
(For Price and Delivery Information email: dave@xyzmarketinginc.com)
(Click on Model Number to view Data Sheet)

Thermostat Application Photo Thermostat Application Photo The CSGW 977 Wire Guard Series is designed to protect a wide variety of devices including horns, strobe lights, radio transmitters and motion detectors while maintaining product visibility. The CSGW 977 has two welded mounting plates for a solid installation and is constructed of high quality 7 AWG steel wire that is welded at all points for strength. It comes with a shiny Nickel plated finish with a Protective Lacquer Coating. It is easy to install with screws and anchors (not provided).
Dimensions: ID 9" X 7" X 7" Deep






CHASE Clock/Bell Wire Guard
Model CSGW CL165
(For Price and Delivery Information email: dave@xyzmarketinginc.com)
(Click on Model Number to view Data Sheet)

Clock Guard Application Photo Chase CSGW CL165 Wire Guard is designed to protect Clocks, Bells and similar devices from Accidental Damage and Theft, while maintaining excellent visibility. Constructed of Heavy Duty 7-gauge steel wire welded at all points for strength the CSGW CL165 has four wire-formed mounting tabs for ease of installation and it comes with a Zinc Plated Finish. It?s easy to install with screws and anchors (not provided).
Dimensions: ID 16.5" X 16.5" X 5" Deep






Chase Smoke Detector/Sprinkler Head Wire Guard
Model CSGW 864
(For Price and Delivery Information email: dave@xyzmarketinginc.com)
(Click on Model Number to view Data Sheet)

CSGW443 Picture The CSWG 864 Wire Guard protects smoke detectors, sprinkler heads and similar products from breakage, accidental damage and vandalism. Constructed of heavy duty all welded 7 Gauge steel wire with four wire-formed mounting eyelets for ease of installation. It comes with a Protective White Epoxy Coating. Installs easily with screws and anchors (not provided).
Dimensions: ID 8" X 6" X 4' Deep






Chase Speaker/Emergency Light Wire Guard
Model CSGW 9159
(For Price and Delivery Information email: dave@xyzmarketinginc.com)
(Click on Model Number to view Data Sheet)

CSGW 9159 Picture The CSGW 9159 Wire Guard is designed to protect speakers, emergency lights and similar devices while maintaining excellent product visibility. It is constructed of high quality 7 Gauge steel wire that is welded at all points for strength and has a Nickel plated finish with a Protective Lacquer Coating. It is supplied with 4 mounting clips and is easy to install with screws and anchors (not provided).
Dimensions ID: 9" X 15" X 9" Deep






Chase Beam/Clock/Emergency Light/Speaker Wire Guard
Model CSGW 121212
(For Price and Delivery Information email: dave@xyzmarketinginc.com)
(Click on Model Number to view Data Sheet)

CSGW 121212 Picture The CSGW 121212 Wire Guard is designed to protect beams, clocks, emergency lights, speakers and similar devices while maintaining excellent product visibility. It is constructed of high quality 7 Gauge steel wire that is welded at all points for strength and has a Nickel plated finish with a Protective Lacquer Coating. It is supplied with 4 mounting clips and is easy to install with screws and anchors (not provided).
Dimensions ID: 12" X 12" X 12" Deep






Chase Beam/Clock/Emergency Light/Speaker Wire Guard
Model CSGW 181212
(For Price and Delivery Information email: dave@xyzmarketinginc.com)
(Click on Model Number to view Data Sheet)

CSGW 181212 Picture The CSGW 181212 Wire Guard is designed to protect beams, clocks, emergency lights, speakers and similar devices while maintaining excellent product visibility. It is constructed of high quality 7 Gauge steel wire that is welded at all points for strength and has a Nickel plated finish with a Protective Lacquer Coating. It is supplied with 4 mounting clips and is easy to install with screws and anchors (not provided).
Dimensions ID: 18" X 12" X 12" Deep






Chase Beam/Clock/Emergency Light/Speaker Wire Guard
Model CSGW 18187
(For Price and Delivery Information email: dave@xyzmarketinginc.com)
(Click on Model Number to view Data Sheet)

CSGW 18187 Picture The CSGW 18187 Wire Guard is designed to protect beams, clocks, emergency lights, speakers and similar devices while maintaining excellent product visibility. It is constructed of high quality 7 Gauge steel wire that is welded at all points for strength and has a Nickel plated finish with a Protective Lacquer Coating. It is supplied with 4 mounting clips and is easy to install with screws and anchors (not provided).
Dimensions ID: 18" X 18" X 7" Deep





Contact: Dave Jeskey
President
xyz marketing inc.
2400 east main street - suite 103 - st. charles, il 60174
phone: 630-584-3001.......fax: 888-210-4593
dave@xyzmarketinginc.com



hit counter